August 2019

Hotend Temp: 190-210 C
Bed Temp: Room - 60C
Speed: 30-50 mm/s
Fan: 100%
Material Type: Filled PLA
Manufacturer: Polymaker
Color: Beige

PolyWood™ is a wood mimic filament without actual wood powder, which removes all risks of nozzle clogs. PolyWood™ is made entirely with PLA using a special foaming technology. It exhibits the same density and appearance as wood.

Hotend Temp: 205-230 C
Bed Temp: 60 - 90C
Speed: 60-90 mm/s
Fan: 30%
Material Type: PLA Blend
Manufacturer: Extrudr
Color: Blue Fire

Extrudr BioFusion is a new breed of excellent material, best suited for designers and makers who are looking for an extra shiny appearance of their printed parts. Besides the good and special looks, BioFusion is also stronger than standard PLA or PETG, so you can also use it for mechanical parts. The temperature resistance of the material is up to 75°C. As it is very easy to print and doesn’t require a heated bed or closed building chamber, not much experience is needed to get extraordinary results. Shine on!

Tricolor PLA
Hotend Temp: 190-220 C
Bed Temp: Room - 60C
Speed: -
Fan: 100%
Material Type: Filled PLA
Manufacturer: Capricorn
Color: color change

PLA that changes color with temperature between 31 and 45C. Objects are green at room temperature, then turn pink when held in hands, and yellow at higher temps.

Hotend Temp: 240-250 C
Bed Temp: 90 - 110C
Speed: -
Fan: off or low
Material Type: ABS
Manufacturer: Atomic Filament
Color: Black

Made from ultra premium Sabic MG94 ABS resin, reduced warp,very strong parts, excellent flow & layer adhesion. Prints at lower temps (240-250C ideal) and flows twice as much as traditonal ABS. Excellent choice for fast & strong prints. Prints DEEP DARK BLACK and HIGH GLOSS , excellent high quality black pigment , fully opaque on the 1st layer.