February 2020

ProPLA
Hotend Temp: 210-240 C
Bed Temp: Room - 60 C
Speed: 40 - 100 mm/s
Fan: 100%
Material Type: PLA
Manufacturer: 3DFuel
Color: Iron Red

Pro PLA (APLA+) has higher impact strength than ABS and Standard PLA with a heat resistance rivaling that of ABS! Available in 1.75mm and 2.85mm diameter, new Pro PLA will help your 3D printed projects look amazing and perform amazingly. Anneal your design after 3D printing for even better heat resistance.

Varioshore - TPU
Hotend Temp: 190-250C
Bed Temp: Not Listed
Speed: Not Listed
Fan: Not listed
Material Type: TPU
Manufacturer: colorFabb
Color: Natural

varioShore TPU allows users to vary the density of the material by adjusting temperature and material throughput (speed & layer height). The base TPU is a 92A material, which will work with most standard extruder set-ups for both Bowden and direct drive systems.

Filatough - Yellow
Hotend Temp: 220-240C
Bed Temp: 50-60 C
Speed: Not Listed
Fan: off
Material Type: Other
Manufacturer: Filatech
Color: Yellow

FilaTough is an engineering compound filament which provides high toughness, excellent balance between hardness and flexibility, superior high temperature resistance and high chemical resistance to a wide range of the chemicals. Withstands up to 130 oC of working temperature (similar to PC) with superior high impact resistance. Does not contain hazardous chemicals like Styrene which is in ABS or Bisphenol in PC.

PETG
Hotend Temp: 205-245 C
Bed Temp: Room-90C
Speed: 25 - 80 mm/s
Fan: off or low
Material Type: Recycled PETG
Manufacturer: GreenGate3D
Color: Spearmint Green

GreenGate3D exclusively extrudes filament from scrap plastics… no virgin found here. Proudly made in the United States of America. Our PET-G can print at lower temperatures than traditional resin, even in the upper range of PLA. With precision tolerance, generous flexibility, unmatched clarity, and TRULY a recycled product, why not try us? GreenGate3D: Recycling The World’s Plastics, One Filament At A Time.